Drywall contractor · Toms River, NJ
Toms River Drywall — Drywall Installation & Repair in Toms River, NJ
Repairs and patching, popcorn ceiling removal, texture matching, and Level 5 finishing. Hung, taped, sanded, and left prime-ready by the same crew that started the job.

Residential Drywall Services in Toms River

Drywall Installation
Board hung, taped, and sanded to paint-ready on remodels, conversions, and coastal builds.

Drywall Repair
Holes, gouges, and popped fasteners rebuilt with backed patches that hold up to scrutiny.

Popcorn Ceiling Removal
Dated acoustic ceilings tested, then scraped or skimmed to a smooth modern lid.

Ceiling Repair
Stained, bowed, and cracked ceilings diagnosed and rebuilt, not just painted over.

Water Damage Repair
Flood and leak damage cut out, metered dry, and rebuilt with documentation for your claim.

Texture Matching
Existing patterns duplicated on a test board first, so the repair vanishes into the wall.

Skim Coating & Level 5 Finish
Full-surface skim coats that turn tired or textured walls into one flat plane.

Drywall Patching
The small-hole list knocked out in one trip: trade access cuts, anchors, and dings.

Basement Finishing
Below-grade board detailed for a high water table and hidden mechanicals.

Garage Drywall
Attached-garage separations built as true rated assemblies, finished to suit the space.

Soundproofing
Quieter bedrooms, offices, and shared walls through mass, decoupling, and sealed edges.

Plaster Repair
Lath-and-plaster walls in the older river and lakeside homes repaired or boarded over properly.

Crack Repair
Recurring cracks traced to movement and fixed at the cause, not chased with caulk.

Home Additions
Addition interiors boarded and finished so the new rooms read as original.

New Construction
Whole-house hang and finish for builders working the shore and the Pinelands edge.
Commercial Drywall in Toms River

Commercial Drywall
Steel-framed partitions and finished interiors for shore-area commercial spaces.

Metal Stud Framing
Light-gauge layout, track, and studs set straight so every wall lands on dimension.

Office Build-Outs
Open shells partitioned into offices, conference rooms, and corridors ready for trades.

Tenant Fit-Outs
Spaces demolished, restored, and rebuilt between tenants on hard deadlines.

Fire-Rated Assemblies
One and two hour walls constructed to their tested listings, penetrations included.
How the work runs
- 01
Protect
Floors sheeted, doorways sealed, furniture covered and fixtures dropped.
- 02
Hang
Board cut to layout, seams landed on framing, screws set to depth.
- 03
Tape
Paper tape bedded in setting-type compound; corner bead set square.
- 04
Finish
Two coats of all-purpose, feathered wide past every joint.
- 05
Sand
Pole-sanded flat, dust contained and vacuumed out.
- 06
Prime-ready
One flat plane, checked under raking light before we call it done.
Materials and finish levels
Standard walls take 1/2" board; ceilings on 24" o.c. framing and garage separation assemblies take 5/8", Type X where a fire rating applies. Bathrooms, laundry rooms and basement perimeters get moisture-resistant board. Joints are bedded in setting-type compound, which hardens chemically and resists shrinkage, then coated with all-purpose compound that sands easily. Outside corners take metal or paper-faced corner bead.
Finish is specified by level: Level 2 and 3 for garages and utility space, Level 4 as the residential standard, and Level 5 (a skim coat over the entire surface) wherever gloss paint or raking light would reveal the difference in porosity between compound and paper. Existing knockdown and orange-peel textures are matched off a sample board before anything is sprayed on your wall.
Towns we work in
Based in Toms River and working roughly 25 miles out. The schedule is real. If we cannot get to you this week, we will say which week we can.
Questions we get
before the quote
What does drywall repair or installation cost in Toms River? +
Small repairs carry a minimum-visit price that covers one or several patches in the same trip, which is why we encourage a whole-house list over a single hole. Larger work is measured: hanging and finishing by the area of board, ceiling removals by the ceiling size and finish level, water damage by what the moisture meter says has to come out. Every job gets a firm written number after we see it, and that number only changes if the scope does.
Our shore house sat closed all winter and the walls have mildew stains. Repaint or replace? +
It depends on the board, not the stain. If the gypsum is still firm and dry, we clean the surface, prime it with a stain-blocking sealer, and skim or repaint, and the shadow does not come back through. If the board is soft, crumbly, or stained through the paper, replacement is the honest answer, because sealed-over damp board keeps deteriorating behind the paint. We check with a moisture meter and tell you which situation you have room by room.
We live in a 55+ community like Holiday City. Can anything be done about the thin walls? +
Yes. Those homes were built quickly with single-layer board on light framing and usually nothing in the wall cavity, so sound passes straight through. The effective fix is adding mass and separation: a second layer of 5/8" board, mounted on resilient channel where the room allows, with the cavity filled and the edges sealed. It is a real improvement, not silence, and we will tell you honestly what a given wall can achieve before you commit.
Our house took on water. What does the drywall rebuild actually involve? +
First the wet material comes out: board cut to a uniform height above the highest wet reading, soaked insulation removed from the bays. Then the framing dries, and we verify that with meter readings rather than a calendar guess. Only then does new board go in, moisture-resistant on lower walls in flood-prone rooms, held off the slab so future water cannot wick up. You get photographs and a written scope for your insurance adjuster at every stage.
Does living near the water change how long drywall finishing takes? +
It genuinely does. Joint compound dries by evaporation, and humid shore air slows every coat, especially in spring and summer or in rooms without air conditioning running. A finish schedule that holds inland can leave soft seams here. We plan around it with realistic coat spacing, dehumidifiers and air movement when the weather calls for them, and setting-type compounds that cure chemically when a deadline is fixed.
Our popcorn ceiling is from the 1970s. Is it safe to have removed? +
Not until it is tested. Sprayed ceilings from before about 1980, which covers a large share of the housing around Toms River including the retirement villages, can contain asbestos. We take a small sample, send it to a lab, and proceed only on a clean result. If the test comes back positive, the removal legally and practically belongs with a licensed abatement contractor, and we will point you to that path instead of scraping it ourselves.